Cleaning And Maintenance - Joycare JC-336 Manual Del Usuario

SANDING ROLLERS REPLACEMENT
To replace the roller and insert a most suitable one (coarse or fine-grained), you just need to
press the release button (C), remove the piece, and insert another roller until you hear a click,
indicating the roller has been placed correctly.
Note: Do not turn the product on if you have not inserted the sanding roller first.
When the results are not satisfactory anymore, the rollers should be replaced. The frequency of
their replacement may vary according to their use and the size of the affected areas.
Due to their high wear rate the sanding rollers are available as spare parts, with
product code JC-337.

CLEANING AND MAINTENANCE

A regular cleaning of the product ensures a better performance and longer lasting. It is
recommended to clean it after each use.
The product is water proof, so you may rinse it with tap water to clean it.
Remove the roller protection lid and clean the roller with the brush provided.
Moist the brush with alcohol before use to ensure a hygienic cleansing. Do not light up the
product when cleaning the roller. You may rinse the roller under tap water afterwards.
Clean the body of the device with a soft cloth, slightly moistened, and with a mild detergent.
Eventually dry with a lint free soft cloth. Do not use corrosive detergents or hard brushes!
Keep the product in a cool and dry place, away from heat sources and damp areas.
Keep the device out of the reach of children.
13