Festool SYS-PST 1500 Li HP Manual De Instrucciones Original página 20

English
5 Parts of the device
[1-1]
AC charging input
[1-2]
AC output protective cap
[1-3] AC output
[1-4]
Carrying handle
[1-5]
Systainer lid with T-Loc
[1-6] DC output compatible with
USB‑C
TM
[1-7] On/off switch
[1-8]
PRCD protective adapter
[1-9] LED indicator
[1-10] T-Loc
[1-11] Charging cable
[1-12] Guard
[1-13] Transport switch
The specified illustrations appear at the
beginning of the Operating Instructions.
6 Commissioning
6.1 State of charge at
commissioning
SYS‑PST 1500 Li HP is only slightly
charged when delivered.
6.3 Applications of the PRCD protective adapter
Combination
with one con­
sumer:
Combination
with a mobile
dust extractor
and another con­
sumer:
Combination
with a multiple
20
No PRCD protec­
tive adapter nec­
essary.
PRCD protective
adapter [1-8]
necessary.
No PRCD protec­
tive adapter nec­
essary.
► Check the state of charge (see sec­
tion 7.1).
► Charging (see section 7.2).
6.2 Connecting consumers
► Open the Systainer lid with the T-
Loc [1-5].
► Deactivate transport mode: Set the
transport switch [1-13] to "I".
► Close the Systainer lid with the T-
Loc [1-5].
► Connect the mains power cable of
the consumer to the AC out­
put [1-3].