femstar ONE2STAY Manual Del Usario página 2

E
CAutIoN
For your child's safety unconditionally follow these instructions to prevent slipping, falling and resultant injuries.
• W hen collapsing and extending the high-chair take every precaution to ensure that children are not in close
proximity of the high-chair to prevent their fingers getting jammed, etc.
• T o avoid the risk of suffocation always remove the plastic sleeve and/or carrier bag from this item and keep it away
from babies and toddlers.
• T his collapsible high-chair is suitable for babies and toddlers 6 to 36 months in age or up to 25 kg (50 lbs) in weight.
Never leave your child unattended!
• Toddlers in the high-chair are the parents' responsibility and must be attended at all times.
• Always buckle up your child´s belt and adjust it to fit your child to prevent your child from falling or slipping out.
• To prevent unintended collapsing, always check that all locking mechanisms are properly fastened.
• Always position the high-chair on a level and solid surface to avoid it tilting.
• Never use the high-chair for children who cannot sit upright unsupported.
• Never carry the high-chair along with your child in it.
• Never use the high-chair as a step ladder and never position the high-chair near a step ladder or platform.
• Pushing off tables or objects must be guarded against and prohibited.
• B e aware of the risk of open fire and other sources of extreme heat such as electrical heat sources, gas heaters etc. in
the vicinity of the high-chair.
• Never position the high-chair near dangling curtain cords, drapes, telephone cords and other cables and/or belts.
• Never use the high-chair when it has worn or broken parts.
• Never make modifications to the high-chair that are not permitted under applicable rules and regulations.
• Use only original spare parts of FemStar.
• I f there is a problem, then contact our customer service or contact
address of FemStar in your country.
Care instruction
Remove the plastic caps situated under the fabric lining the top of the frame
(illustration 8) to separate the seat from the frame. Clean the seat with a damp
cloth or smooth brush. Only use a mild detergent to clean the metal and plastic
parts. Please Note: when returning the seat, always put back the plastic caps on
top of the frame in order to prevent wear to the seat (illustration 8).
Assembly and user instructions
1. Scope of delivery (illustration 1)
1x Frame + Seat
2. Assembling the high chair
- Take the entire high-chair from its carrier bag (illustration 1).
- Now proceed with extending the high-chair.
- Extend the frame (from the X-hinge outward) in one quick jerk
(illustration 2).
- P ress down the locking mechanism front and back of the high-chair
(illustration 4).
- Ensure that the locking mechanisms front and back of the seat are
secure (illustrations 3 and 4).
- Check that the seat fits properly and securely over the frame tubing.
Pull down to secure (illustration 5).
- Always buckle up your child's belt / harness.
- Adjust belt / harness to fit your child.
- Fasten the two elastic loops to the sides of the footrest to secure the
footrest to the frame (illustration 6).
- The high-chair is now ready for use.
- A djust the high chair in a comfortable position by, disconnecting the
buckle at the backside of the seat (illustration 9/10).
3. Disassembling the high chair
Follow the steps for assembling the high-chair in reverse.
• Unfasten the two elastic loops to the sides of the footrest.
• Slightly lift the locking mechanisms front and back.
• Pull the bottom locking mechanism forward to release it
(illustration 7).
• Collapse the high-chair.
Make sure that during collapsing the fabric of the seat does not get tangled
in any moving parts of the frame. Place the buckle of the belt on top of the
collapsed high-chair in order to prevent pinching and wear.
2
FS_Comfort_User-Manual_01_2017.indd 2
ReAD theSe INStRuCtIoNS CARefully BefoRe uSe
AND keeP theM IN A SeCuRe PlACe
1
3
5
7
9
≤ 50 lbs
2
4
6
8
10
www.femstarinnovations.com
6-36 Months
01-02-17 13:55