Bluetooth Pairing - Haven ISOtunes PRO Manual De Instrucciones

EN
providing you with superior noise isolation and the best possible listening experience.
ISOtunes PRO has built-in custom fi t memory wires. These wires gently wrap around
®
the top and back of your ears for a personally unique fi t, and maximum comfort and
stability.
Operating Your ISOtunes
Operation LED Status
Power On Blue LED fl ashes 2 times slowly, then 2 times quickly twice
Power Off Red LED fl ashes 4 times
Pairing Red LED & Blue LED fl ash alternately
Standby Blue LED fl ashes 3 times quickly every 5 seconds
Incoming Call Blue LED fl ashes continuously
Low Battery Red LED fl ashes once per second
Charging Red LED stays on during charging
Blue LED indicates charging is fi nished
On / Off
Press and hold the multifunction button for 2 seconds. A blue LED will fl ash two times
slowly, then two times quickly twice in a row, indicating the headphones are powered on.
Press and hold the multifunction button for 3 seconds. A red LED will fl ash slowly 4
times, indicating the headphones are now powered off.
PRO Headphones
®

Bluetooth Pairing

Make sure the headphones are powered off. Press and hold the multifunction button
for 5 seconds to enter into pairing mode, at which time red and blue lights will fl ash
alternately. Activate your phone or device's Bluetooth
PRO and select. If a PIN is required, enter "0000" to connect.
After powering off and powering back on again, ISOtunes
reconnect with its paired device, if in range.
Audio Control Functions
Adjust Volume: Press the 'volume up' or ' volume down' buttons to adjust the volume. A
beep will indicate when you've reached maximum or minimum volume.
Play/Pause: Press, but do not hold, the multifunction button to play or pause your music.
Previous Track: While listening, press and hold the 'volume down' button for 2 seconds
to go back to the previous track.
Next Track: While listening, press and hold the 'volume up' button for 2 seconds to
skip to the next track.
Phone Call Functions
Answer Call: Press, but do not hold, the multifunction button to answer a phone call.
End Call: Press, but do not hold, the multifunction button to end a phone call.
Reject a Call: Press and hold the 'volume up' button for 2 seconds to reject a call.
Transfer a Call: While on a call, press and hold the 'volume up ' button for 2 seconds to
switch the call from the headphones to your mobile phone. Press and hold the 'volume
up' button again for 2 seconds to switch the call back to the headphones.
EN
function, search for ISOtunes
® ®
PRO will automatically
®