TruVue TVA2X2 Guia De Instalacion página 4

Attaching Screen to Wall Assembly
2
Select the small (A), medium (B) or large (C) screws. Attach two spacers (F) to the top two mounting
holes on the back of the screen using two of the selected screws. Tighten screws firmly. Do not
overtighten.
F
Lift the screen and hook spacers (F) on to the wall assembly. Fasten the bottom of the screen to
wall assembly (K) using two selected screws and two spacers (G). Tighten screws firmly. Do not
overtighten.
NOTE: Allen wrench (I) may be needed to adjust the swivel of the mount
F
K
G
SCREW
route coords through
SCREW
coord management hook
VESA 75 x 75
VESA 100 x 100
VESA 100 x 200
VESA 200 x 200
4 of 16
WARNING
Do not over tighten screws, or
damage may occur.
Fig. 2a
ISSUED: 09-11-09 SHEET #: 202-9377-1