Hardware Installation - IOGear GPLHDPROK Guia De Confirguarcion Rapide

Hardware Installation

1. Connect the HDMI Input Port on the back of the Transmitter to the HDMI Output Port on your
video source using the included HDMI cable.
2. Connect IR Blast Cable to IR Out Port on the back of the Transmitter.
3. Connect the HDMI Output Port on the back of the Receiver to the HDMI Input Port on your
video display using the included HDMI cable.
4. Connect the IR Extension Cable to the IR In Port on the back of the Receiver.
5. Plug the power adapter cable into the power jack on both the Transmitter and Receiver.
Plug the power adapters into available power outlets.
Note: Follow steps 3~5 above to connect up to 3 additional receivers
Receiver
IR IN
ON
OK
TV
Blu-ray / DVD Player
IR OUT
Receiver
IR IN
ON
OK
TV
IR OUT
Transmitter
Receiver
IR IN
ON
OK
TV
3
Powerline
HDMI cable
Receiver
IR IN
ON
OK
TV