Pair The Gateway - Nokia AD-42W Manual Del Usuario

6. Pair the gateway

Before you can use the gateway with a compatible audio device that
supports Bluetooth wireless technology, you need to pair the gateway
with it.
To pair the gateway with a music player (such as a music player device
or a mobile phone with a music player feature), do as follows:
1. Check that the operating mode key is in the down position.
If it is not, press the key.
2. Press and hold the pairing key until the indicator light is
continuously shown.
3. Use your music player or phone to search for and select the
gateway and to enter the Bluetooth passcode 0000.
If the pairing was successful, the indicator light flashes quickly
10 times.
To pair the gateway with a headset, do as follows:
1. Check that the operating mode key is in the up position. If it is
not, press the key.
2. Set up the headset for pairing as instructed in the user guide for
the headset.
3. Press and hold the pairing key until the indicator light is
continuously shown.
The gateway is paired automatically with the headset. If the
headset requires a Bluetooth passcode and the default passcode of
the headset is not 0000, change the passcode to 0000 as instructed
in the user guide of the headset.
P a i r t h e g a t e w a y
9