Remote Level/Basseq Control; (X1.1000.1D & X1.2000.1D Only) - Lighting Audio STORM Instalación Y Operación

Installation
From Source Unit
X1.1000.1D
X1.2000.1D
From Source Unit
X1.400.2
2-Channel
From Source Unit
X1.800.4
4-Channel
REMOTE LEVEL/BASS EQ CONTROL
(Models X1.1000.1D & X1.2000.1D Only)
Mounting and installation
1. Find a location, either under the dash or near
the center console, that gives easy access to
the remote.
2. Using the screws supplied, install the mounting
clip with the tabs towards the back.
3. Route the cable for the remote and connect to
both the remote and amplifer.
4. Slip the remote onto the mounting clip until it
snaps into place.
8
From Source Unit
From Source Unit
2-Channel – Bridged
From Source Unit
4-Channel –
Set as 3-Channel Bridged
Mounting
Clip