Weather Guard 96101-3-01 Manual De Instalación página 3

CARGO SIDE
INSTALLATION INSTRUCTIONS
STEP 2: Attach Driver Side Panel to Center Panel
UNEVEN
with both panels flush at the bottom using six (6)
1/4-20 x 5/8" Hex Head Bolts and 1/4-20 Nylon Lock
Nuts.
NOTE: Not all mounting holes will be used on the
vertical sides of either panel. Extra mounting holes
are for the swing door option available for this
Bulkhead.
FLUSH/EVEN
STEP 3: Attach the Passenger Side Panel
to Center Panel using six (6) 1/4-20 x 5/8"
Hex Head Bolts and 1/4-20 Nylon Lock
Nuts. With the help of a second person,
place assembled Bulkhead inside the van
in the approximate mounting location.
NOTE: Not all mounting holes will be used
on the vertical sides of either panel. Extra
mounting holes are for the swing door
option available for this Bulkhead.
3
Part No. 24-0306 REV. D ECN 5282 03/13