BRASS AKRON OZZIEMASTER 922 Instrucciones De Instalación, Operación Y Mantenimiento página 9

Figure 3
OzzieMaster
If.unit.moves.while.charging,.reset.spikes .
C . . DIRECT.MOUNT.FLANGE
The Dual Inlet/Flange Adapter must be used with the Direct Mount Flange. (See Figure 4)
Note:.The.OzzieMaster.does.not.have.any.horizontal.rotation.therefore.the.Direct.Mount.Flange.must.be.mounted.at.a.known.
set.position.(Example:.Facing.the.target) . . There.will.then.be.two.mounting.positions.180°.apart .
Ensure.lock.pins.are.fully.engaged . . Aim.discharge.in.a.safe.direction . . Charge.unit.slowly .
CAUTION:. When.the.unit.is.stored.in.the.direct.mount.base,.it.is.recommended.that.the.nozzle.or.tip.be.lowered.against.a.
rigid.support.or.removed.during.transportation.to.avoid.damage.to.the.product .
DANGER:. The.oscillating.discharge.applies.side.loads.to.the.mounting.flange . . These.types.of.loads.are.not.typical.of.fire.
fighting.monitors . . The.flange.connection.to.the.truck.or.pipe.must.be.able.to.withstand.a.torque.of.300.ft-lbs . .
If.NPT.connections.are.used,.they.must.be.tightened.to.at.least.300.ft-lbs . . Failure.to.do.so.may.allow.the.flange.
to.spin.on.the.pipe,.and.possibly.come.off,.putting.personnel.at.risk.of.being.hit.by.the.nozzle.discharge .
BUCKLE
SINGLE INLET
ADAPTER
7
3414/3416 SINGLE INLET BASE
3411/3413 SINGLE INLET BASE