Product Overview - Furrion Access FAN17B83 Manual De Instrucciones

Product Overview

Power Button
WPS/Status
Button
Button
●
Power Button
●
●
●
WPS/Status
Button
●
Reset Button
●
In OFF mode, press and hold the POWER button for about 4 seconds to turn on
the device. The Signal Indicator LED will be illuminated and then off.
In ON mode, press and hold the POWER button for about 4 second to turn off the
device.
Press and hold the WPS/STATUS button for 5 seconds to turn on the WPS
function. Default setting is 2.4G WiFi, users can set to 5G WiFi via UI.
Short press the WPS/STATUS button to view the network signal strength. The
Signal Indicator LED will be illuminated for about 20 seconds and the number of
lit bars indicates the signal strength.
NOTE: You may check the signal strength by turning on the Status LED via UI.
The Signal Indicator LED will be kept illuminated unless you turn off the Status
LED in UI.
Press and hold the RESET button for 5 seconds to reset the device to factory
default settings. All the LEDs blink 3 times indicates you have reset the device
successfully.
Short press the RESET button to restart the device.
Description
Reset Button
4