Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
EN
Microwave LED Sensor Light
The product adopts microwave LED sensor mould with high-frequency electro-magnetic
wave (5.8GHz) and integrated circuit SMD LED. It gathers automatism, convenience, safety,
saving-energy and practical functions. The wide detection field depends on detectors. It
works by receiving human motion. When one enters the detection field, it can start the load
at once and identify automatically day and night. Its installation is very convenient and its
using is very wide. Detection is possible to go through doors, panes of glass or thin walls.
SPECIFICATION:
Power Sourcing: 220 -240V/AC
Detection Range: 180°/360°
Power Frequency: 50Hz
Detection Distance: wall: 5-15m (adjustable)
ceiling: 2-8m (radius), adjustable
Time Delay: Min. 10sec±3sec
Max. 12min±1min
FUNCTION: Can identify day and night: It can work in the daytime and at night when it is
adjusted to the "sun" position (max). It can work in the ambient light less than 3LUX when it
is adjusted to the "moon" position (min). As for the adjustment pattern, please refer to the
testing pattern. SENS adjustable: It can be adjusted according to using location. The
detection distance of low sensitivity could be only 2m and high sensitivity could be 16m
which fits for large room. Time-Delay is added continually: When it receives the second
induction signals within the first induction, it will restart to time from the moment.
MCE138
MCE138
Transmission Power: <0.2mW
Installing Height: wall: 1.5-3.5m
ceiling: 2-4m
Rated Load: 10W (20PCS LED)
Detection Motion Speed: 0.6-1.5m/s
Power Consumption: approx 0.9W
HF System: 5.8GHz CW radar, ISM band
-1-
Publicidad
Resumen de contenidos para Maclean Energy MCE138
- Página 1 MCE138 Microwave LED Sensor Light MCE138 The product adopts microwave LED sensor mould with high-frequency electro-magnetic wave (5.8GHz) and integrated circuit SMD LED. It gathers automatism, convenience, safety, saving-energy and practical functions. The wide detection field depends on detectors. It works by receiving human motion.
- Página 2 Time–Delay is adjustable. It can be set according to the consumer’s desire. The minimum Mikrofalowa lampa LED MCE138 time is 10sec±3sec. The maximum is 12min±1min. NOTE: the high-frequency output of the HF sensor is <0.2Mw- that is just one 5000th of the Urz¹dzenie posiada czujnik mikrofalowy oraz uk³ad scalonym SMD LED.
- Página 3 VERBINDUNGSLEITUNGSDIAGRAMM: (Siehe das Diagramm) Mikrowelle Sensorlicht MCE138 TEST: Drehen Sie den LUX-Knopf im Uhrzeigersinn auf dem Maximum (Sonne). Drehen Sie den SENS Knopf im Uhrzeigersinn auf dem Maximum(+). Drehen Sie den ZEIT-Knopf gegen Das Produkt nimmt Mikrowelle Sensorform mit der elektromagnetischen Hochfrequenzwelle den Uhrzeigersinn auf dem Minimum (10S), Wenn Sie die Strömung einschalten werden,...
- Página 4 Wenn der Strömung der Instruktion entspricht. CONNEXION FILS SCHÉMA: (voir le schéma) Microondes LED capteur de lumiere MCE138 ESSAI: Tournez le bouton LUX vers la droite sur le maximum (sun). Tournez le bouton dans Le produit adopte micro-ondes LED capteur moule a haute fréquence électromagnétique le sens horaire SENS sur le maximum (+).
-
Página 5: Especificaciones
Vuelva a conectar la corriente eléctrica, compruebe y ajuste el aparato. Lámpara LED con sensor por microondas MCE138 ESQUEMA DE CONEXIONES: (consulte el diagrama adecuado) La lámpara LED integra sensor de presencia por microondas (5.8GHz) que aporta nuevas funcionalidades. - Página 6 TEST: Ruotare la manopola LUX sul massimo (sole). Ruotare la manopola SENS sul Lampada LED con Sensore a Microonde MCE138 massimo (+). Ruotare la manopola TIME sul minimo (10S), Quando si accende il potere, la luce sara in una sola volta. 10 sec ± 3 secondi dopo, la luce si spegne automaticamente.