Descargar Imprimir esta página

Oh!FX TC-112 Manual De Instrucciones página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLATION IN PREVIOUS VERSIONS OF WINDOWS
In any case you must download the ohfxusbdmx.inf fi le from our website:
http://www.ohfx.eu/index.php?idi=en&opc=2&ctg=10&id=53
Save the driver fi le on your desktop to install it later.
Driver installation in Windows 8 and 8.1
1.
Click SETTINGS on your Windows menu which is hidden on the right side of your screen. (or
Press WIN logo key + C to open the charms bar).
2.
Click on Change PC settings and afterwards click on update and recovery in the menu on the
left.
3.
Click on Recovery and then on Restart Now after selecting Advanced Startup, the PC will
restart.
4.
Click on Troubleshoot, Advanced options, Startup Settings, and Restart. At this screen, press
option 7 to disable driver signature enforcement. Now you can you can install the unsigned
driver. Note that the eff ect only lasts until the PC is restarted again.
Driver installation in Windows 7
1.
Go to Start menu, and click on Restart option on Shuttingdown menú.
2.
Press F8 (repeatedly) after the Advanced Boot Screen then select : Disable driver signature
enforcement. After the operating system loads up, you can install the unsigned driver. Note
that the eff ect only lasts until the PC is restarted again.
Driver installation in Windows XP
1.
Click on System Properties on My Computer.
2.
A new window appears. Click on Hardware option.
3.
Click then on Drive Signing Options.
4.
Select the option: Ignore – Install the software anyway and don't ask for my approval.
5.
Mark the Administrator option.
6.
Click OK on all following steps, close the Sytem properties and install the driver.
1.
Conecte el USB-DMX INTERFACE al ordenador mediante el cable USB (3).
2.
Si utiliza Windows 10 el controlador del USB-DMX INTERFACE se instalará automáticamente.
Si utiliza versiones anteriores de Windows consulte el apartado "INSTALACIÓN EN VERSIORES
ANTERIORES DE WINDOWS".
3.
El led indicador de salida DMX (5) se ilumina cuando el USB-DMX INTERFACE está enviando
señal DMX.
INSTALACIÓN EN VERSIONES ANTERIORES DE WINDOWS
En cualquier caso necesitará descargar el archivo ohfxusbdmx.inf desde nuestra web:
http://www.ohfx.eu/index.php?idi=en&opc=2&ctg=10&id=53
Guarde el archivo del controlador en el escritorio para instalarlo posteriormente.
Instalación de controlador en Windows 8 y 8.1
1.
Despliegue el menú que aparece al acercar el cursor a una de las esquinas derechas de la
pantalla y pulse en Confi guración.
INSTRUCTION MANUAL
USB DMX INTERFACE

Publicidad

loading