Descargar Imprimir esta página

POOL EXPERT LED21 Manual De Instrucciones página 2

Publicidad

EN
Models
Pool and patio lights
Specification
- Water resistance of LED lights: Pool and Patio light - IP68
- Light battery : Lithium
- Remote control distance : 4 meters (13 feet)
- Remote control battery: CR2025 (3V)
- Ambient temperature for operation : 14°C – 35°C
- Charging time: 4 – 8 hours
- Battery autonomy (for information only ): White color : 3-4 hours, RGB colors (multicolour) : 7-9
hours
WARNING!
- This is not a TOY. Keep it out of reach by children.
- Keep all products away from chemical, any liquid, or heat.
- Never jump or stand on the patio furniture.
- Do not put the pool and patio light on the water if damage/crack is found.
- Do not submerge the lights into water.
- To reduce the risk of electric shock, never open the light bottom.
- External adapter :
 Never use the external adapter and charger station for purpose other than battery charging
for the light(s) supplied in the same pack.
 The external adapter, charger station / socket on the light should not be used outdoor, not
exposed to rain, humidity, any liquid, or heat.
 Keep the external adapter and charger station out of reach of children.
 Disconnect the external adapter from power when not in use.
 Never attempt to open the external adapter, charger station, or light bottom.
CAUTION
- Before placing the light in a pool, remove any floating chemical dispenser.
- Never throw the light into the pool. Place the light on the water gently.
- Do not put the light in the pool when people are swimming.
- Keep remote control away from water, any liquid, or heat.
- Take the light out of the pool when not in use.
Operation
Charge the light - First Step!
WARNING! Never charge the product in a pool, water, or in rain. Charge in a dry, indoor location
only.
Pool and Patio Light
Before first use, charge the battery for 4 - 8hours.
- Place the charger station on a dry and level surface.
- Use clean and dry cloth to clean the surface of the charger station and the bottom of the light.
- Insert the adaptor plug into the socket under the charger station. Fig.1.
- Connect the external adapter to the electrical outlet.
- Indicator light on charger station lights up in green color.
- Place the light properly on the charging base. It will begin to charge and the indicator light will
change to red.
- Indicator light changes back to green when the battery is fully charged.
Pool & Patio Lights
INSTRUCTION MANUAL

Publicidad

loading

Este manual también es adecuado para:

Led30