Assembly; Operation - Staples SPL-NXC18UA Manual Del Usuario

Assembly

NOTE: This shredder will operate only when used with the supplied waste bin.
The supplied waste bin has a built-in safety feature which prevents the shredder
from operating if used with any other waste bin or if improperly assembled.
This shredder contains sharp edges on the underside of the shredder head.
The plug on the power supply cord is intended to serve as the disconnect
device, so the socket-outlet shall be installed near the equipment and shall be
easily accessible.

Operation

Please read operating instructions before using shredder. Check machine for
damage or defect; some particles of paper are normal due to product testing.
Setup
1. Place the machine on level ground and plug the power cord into any easily
reached grounded electrical outlet.
2. Make sure the waste bin is correctly positioned and closed.
3. To power ON, press the power button (
unit ON or OFF. The machine will be ready to operate when the power LED is
illuminated blue.
Paper Clips and Staples:
Our shredders are designed primarily to shred paper, credit cards, CD's or
DVD's (as indicated). You should remove small paper clips and staples whenever
possible to prolong the life of the unit. You should not shred commercial staples,
large paper clips or binder clips.
SPL-NXC18UA
) on the front panel to turn the
7