Installing Batteries - Coby Snapp CAM3000 Manual De La Instrucción

Installing Batteries

The CAM3000 requires 4 x "AAA" 1.5V
batteries.
1. Slide the battery cover in the direction of
the arrow to access the battery compart-
ment.
2. Load the four batteries, taking care to
position the positive and negative ends
as shown.
3. Replace the battery cover.
The batteries used in this device may present a fire
or chemical burn if mistreated. Do not disassem-
ble, incinerate, or heat the batteries.
Use only the size and type of batteries specified.
Do not mix old with new batteries, or mix different
types of batteries.
Do not charge batteries that are not intended to
be recharged. Follow the battery manufacturer's
directions.
Do not install the batteries with their polarities re-
versed; this may damage the unit.
If the unit will not be used for a long time, remove
the batteries to prevent damage or injury from
possible leakage.
Page 10 Getting Started