memorex MA4203 Guia Del Usuario página 13

OPERATION (CONTINUED)
TO SET OR RESET THE ACTUAL TIME
Follow the instructions below to manually set the time. To automatically
set the time with the iPod/iPhone, see
1
3
2
With the unit off and NO iPod/
iPhone docked, press and hold
the SET button 1 until the 24h
or 12h starts blinking. Within ten
seconds, press the TUNING/Skip/
Search Down o 2 or Up n 3
button on the main unit to set to
24 hour (military time) or 12 hour
(Standard USA time).
3
3
2
Press the SET button 1; the
minutes will blink. Within ten
seconds, press the TUNING/Skip/
Search Down o 2 or Up n 3
button to set the current minute.
CONTINUED ON THE NEXT PAGE
All manuals and user guides at all-guides.com
1
1
12
the following page.
2
3
2
Press the SET button 1; the hours
will blink. Within ten seconds,
press the TUNING/Skip/ Search
Down o 2 or Up n 3 button on
the main unit to set the current
hour.
NOTE: If set to 12 hour in the
previous step, be sure to observe
the AM or PM indicators to make
sure you have set the hour
correctly.
4
3
2
Press the SET button 1; the year
will blink. Within ten seconds,
press the TUNING/Skip/Search
Down o 2 or Up n 3 button to set
the current year.
1
1