Operating Precautions - Silicon Graphics 320 Guia De Instalacion

speakers.fm Page 1 Tuesday, January 19, 1999 11:35 PM
EN-1 Speaker Installation Guide
All manuals and user guides at all-guides.com
The rubber plugs inserted in the headphone and subwoofer ports ensure
optimum sound quality. Remove the plug from the port to attach headphones
or a subwoofer. Reinsert the rubber plugs when the ports are not in use.

Operating Precautions

• To prevent risk of electric shock, do not remove the covers or backs of the
speakers.
• Do not expose the speakers or the external power source to water or other
liquids.
• Always disconnect the speakers from the power source before attaching
or removing any speaker cables.
• Do not expose the speakers to direct sunlight, excessive dust, or
vibrations.
• Use a damp soft cloth to clean the speakers. Do not use a solvent.
• Fluorescent or neon light fixtures can interfere with the speakers and
create a humming sound. Move speakers away from these fixtures to
reduce or eliminate noise.
• Avoid microphone feedback, continuous output from electronic musical
instruments, and distorted output from any signal source.
• To prevent data loss on discs and tapes, keep them at least four inches
away from the speakers.
• Use only the AC adapter that shipped with the speakers. Using another
power supply may damage the speakers.
Caution: Always disconnect the AC adapter from the power source
before handling the adapter or speakers.