Congratulations!
You have chosen to purchase a high-quality item.
Familiarise yourself with the item before using it
for the first time.
Read the following instructions for
use carefully.
Only use this item in the manner described and
for the purpose for which it is intended. Store
these instructions for use carefully. When passing
the item on to third parties, please also hand
over all accompanying documents.
Scope of delivery (fig. A)
1 x bed transfer aid, unassembled (1 - 3)
4 x strap (4)
1 x instructions for use
Technical data
Dimensions: approx. 51 x 42-52 x 91cm
(W x H x D)
Max. user weight: 110 kg
110
Date of manufacture (month/year):
05/2019
Intended use
This product is to be used exclusively as an aid
for standing up to make it easy to get out of bed
and it is for private use only. The product is not
suitable for use by people with mental disabili-
ties.
This product is not a medical device and has not
been developed for the field of rehabilitation
and medical support of individuals.
Safety instructions
Danger to life!
• Never leave children alone and unsupervised
with the packaging material. There is danger
of suffocation.
10
GB/MT
Risk of injury!
• Make sure that all parts are undamaged
and have been assembled correctly. There
is a risk of injury if not assembled correctly.
Damaged parts can affect safety and function.
Do not use the product when there is visible or
suspected damage!
• Use the product only for its intended use.
• The product is not suitable for beds without a
slatted frame, e.g. box spring beds.
• The product is not suitable for beds with
electric slatted frames.
• The product is suitable exclusively for slatted
frames with a width of 90 cm.
• The straps may only be attached to the slatted
frame of the bed. On a bed with two slatted
frames do not affix the straps to the support
post in the middle of the bed.
• The product is suitable for all standard
mattresses.
• The product may only be used under adult
supervision and not as a toy.
• Never stand or sit on the product.
• Beware of jamming your fingers in the drill
holes for adjusting the height.
• The product is not a side rail and does not
protect against accidentally falling out of bed.
Assembly
1. Assemble the product as shown in fig. B. The
push buttons must snap visibly and audibly
into the holes.
2. Press the push buttons on both sides and pull
the product out evenly up to the desired height
(fig. C).
3. Attach the product to the slatted frame with the
straps (4) at all four corners so that the product
can no longer slip out of place (fig. D).
Warning!
• Beware of jamming your fingers in the drill
holes.
• Do not use the product if the push buttons for
adjusting the height are not fully locked in
place in the holes!