English - WD Plus CSL 303722 Manual Del Usario

4. Initial use
Take the device out of the package and remove all the packaging material. Then
connect the Gamepad to any USB port of your computer or your gaming console.
As soon as LED1 (left) glows, the Gamepad has been connected successfully.
Thanks to Plug&Play, no separate driver installation is required.
Change mode
To change the input mode, press the Home button for about 3 seconds. You can
then change between X-input and direct input. Pressing the home button briefly
in "Direct Input" mode toggles between the digital mode (LED 1 is turned on) and
the analogue mode (LED 1 + 2 turned on). X-input mode is used for most modern
PC games.
X-input mode is used for most modern PC games.
In the X-input mode, you will see the gamepad as "XBOX360 controller".
5. Dual vibration function
The Gamepad has two strong vibration motors. The controls are represented more
realistically with the vibration effect.
Note: Please note that the vibration works only if the game or the program sup-
ports this function and the corresponding feature has been activated in the game
options.
You can test the dual vibration function on your computer. Access the Gamepad
settings in "System controls" under "Devices and Printers" (Windows /7/8/10).
8

English