Description; 1 1 1 Using Your Immersion Blender; Cleaning - Krups KZ700 Manual Del Usuario

KR_MIXER_KZ700_2551037-03_Mise en page 1 13/10/11 13:56 Page7

DESCRIPTION

a TURBO Button
b POWER Button
c Blender Body
USING YOUR IMMERSION BLENDER
Before first use, wipe clean all parts and dry carefully. Refer to the CLEANING section.
CAUTION: Blades are extremely sharp. To avoid injury, use extreme care
when handling the blender shaft.
CAUTION: Before attaching or detaching the blender shaft, always check to
ensure the blender is unplugged.
When blending, ensure that the Blender Body is not immersed in foods or
liquids. Only the Blender Shaft should be immersed in foods or liquids.
Do not operate the appliance continuously for more than one minute. After
one minute use, unplug and let the unit rest until it cools down before using
it again.
US I NG TH E B LE N D I NG S HAFT

Insert the blending shaft into the blender body and turn counter clock-wise to lock in place (fig. 1).
Use the line on the blender body and the icons on the blender shaft as a guide.

Place ingredients to be blended in a container tall enough to avoid splashing.

Plug in the unit.

Immerse the blending shaft so the ingredients cover the blades and then select the desired speed on
the speed selection dial, as illustrated (fig. 2).

Then press the POWER button and hold down to begin blending (fig. 2). Always immerse the blending
shaft first, then press POWER to avoid splashing. Also take care when blending large quantities or
when using deep containers to ensure that the blending body is not immersed in foods or liquids. Only
the blending shaft should be immersed in foods or liquids.

Slowly move the blender shaft up and down or in a circular motion to process foods evenly. To pause
blending or when blending is complete, release the POWER button. For maximum speed, set the speed
dial to HIGH and press the TURBO button instead of POWER.

Unplug the blender and then detach the blender shaft. Refer to the CLEANING section for cleaning
instructions.
CAUTION: Blades are extremely sharp. To avoid injury, take care when
detaching the blender shaft.

CLEANING

CAUTION: the blades are extremely sharp.

Always disconnect the appliance before cleaning it.

Do not immerse the blender, power supply cord or plug into water or any other liquid.
d Detachable Shaft
e Speed Selection Dial
f Blender Blades
English
7