Neck Loop/Auxillary Port; Nite Lite; To Place Or Receive A Call - Walker W-300 Guia Del Usuario

➤ Nite Lite

The Nite Lite feature illuminates the key
pad and left most extra large storage
button. The Nite Lite makes the keypad
visable when the phone is hung up, allow-
ing it to be easily located at night. The
Nite Lite can be adjusted to OFF, LO
and HIGH.

➤ Neck Loop/Auxillary Port

The W-300 has a 3.5mm phono jack to
use with a neck loop. The volume to the
neck loop is controlled with the Clarity
Power Control. When the neck loop is
plugged in, the receiver in the handset is
disabled.
Once you have installed your Walker
W-300 according to the instructions noted
previously, it will be ready to use.

➤ To Place or Receive a Call:

1. Adjust the Clarity Power Control
lowest setting (zero).
2. Pick up the handset and listen for the
caller's voice or a dial tone. Watch the
16
WALKER W-300 FEATURES
TM
to its
green sound level light located on the
phone base, next to the program button.
It should sign steady.
3. When placing a call, dial as you would
any phone and wait for someone to
answer.
4. Press the Boost Button
5. Adjust the Clarity Power Control
upwards to a level where the other party's
voice is heard loud and clear, and begin
conversation.
6. When you complete the call, return the
handset to the base unit.
7. After hanging up, the sound level will
reset to normal level.
8. Pressing the Boost Button during
subsequent conversations will return the
volume to your set sound level.
Note: If you made an error while dialing,
just depress the hookswitch, listen for a
dial tone, and dial again.
TM
Walker W-300