Publicidad
Idiomas disponibles
Idiomas disponibles
Explanations to the pictures:
Fig No. 1 – Set parts list
Part name
DVD player
GB
Auxiliary video monitor without DVD drive
Holder of DVD player/auxiliary video monitor
Remote controller
Earphones AHR-001
Connecting cable (3.5 mm Jack / 3 x CINCH)
Feeder adapter 230 V for the standard of EU A-V
Tool bag
User's Manual
Bolt M3
Assembly Instructions
Caution:
In addition to the Assembly Instructions, the package contains a User's Manual as well.
Information contained in these Instructions and Manual may partly differ. The informa-
tion provided in these Assembly Instructions take priority over the information stated in
the User's Manual.
Fig No. 2
Mounting the DVD player into the holder.
– 2.1 Mount two M3 bolts into the upper nuts in the player's rear cover and tighten them
carefully using a screwdriver. If the DVD player / auxiliary video monitor contains
connector caps in its bottom part, remove the caps.
– 2.2 Insert the device into the holder so that the bolts fit into grooves J1 and J2.
– 2.3 Secure the payer with the hold-down bolt on the bottom part of holder. When as-
sembling the device and holder use adequate force to push the DVD device while
tightening the hold-down bolt.
– Use the same method to assemble the auxiliary video monitor and the other holder.
Fig No. 3
Connection of AV connector.
Connect the K connector into the AV OUT slot of the DVD player. In the other holder
with the auxiliary video monitor, connect the K connector with the AV IN slot.
Fig No. 4
Connection of cables into the connectors in the back rest.
Connect the DVD player holder's connectors L1 and L2 into the slots in the back rest and
lead the cables upwards. Use the same method to connect the connectors of the holder
for the auxiliary video monitor.
Position
Pieces
A1
1
A2
1
B
2
C
1
D
2
E
1
F
1
G
1
H
1
I
4
J
1
Publicidad
