Symbols Used In The Manual - Crown CT10049 Manual Original

parts. This will ensure that the safety of the power tool
is maintained�
• Follow instruction for lubricating and changing ac-
cessories�
Special safety warnings
• Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury�
• Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock�
Safety guidelines during power tool op-
eration
• Considering that asbestos may cause cancer, as-
bestos-containing materials shall not be processed�
• When using power tools outdoor, you must install
fault current (FI) protection switch on the power
tool�
• During work, you must tightly hold the power tool
and ensure you stand firmly. You should hold the pow-
er tool with your hands�
• When working, follow the position of the power
supply cable� Warning: power cable may be entan-
gled by stirring paddle� Avoid winding it around your
legs or arms�
• In case the power tool should fall into the stirred so-
lution, switch off the plug immediately and have the
power tool checked by a service center� Material that
has penetrated into the power tool can cause damage
and lead to an electric shock�
• Do not process explosive substances (for example,
highly inflammable solvents) and materials with igni-
tion temperature of lower than 21°С. Study the manu-
facturer's instructions for such kind of materials care-
fully and stick to them�
• Take protective measures if combustible or explo-
sive dust, harmful to one's health, may appear during
working�
• It is strictly prohibited to use the power tool for mix-
ing any food products�
• The container for mixing must be durable enough,
and it must be placed on stable surface�
• When mixing, prevent splashes from getting on the
tool body as it may cause electric shock�
• Always wait until the power tool has come to a com-
plete stop before unhand it�
• Avoid overheating your power tool, when using it for
a long time�
• Don't operate the power tool in stationary mode (e�g�
placing it into special frame)�

Symbols used in the manual

Following symbols are used in the operation manual,
please remember their meanings� Correct interpreta-
tion of the symbols will allow correct and safe use of
the power tool�
Symbol
English
13
Meaning
Mixer
Sections marked gray - soft
grip (with insulated surface)�
Serial number sticker:
CT ��� - model;
XX - date of manufacture;
XXXXXXX - serial number�
Read all safety regulations
and instructions�
Wear safety goggles�
Wear ear protectors�
Wear a dust mask�
Disconnect the power tool
from the mains before instal-
lation or adjustment�
Movement direction�
Rotation direction�
Locked�
Unlocked�
Double insulation / protec-
tion class�
Attention� Important�