TrekStor DVB-T Stick Terres Manual Del Usuario página 9

3) Operation of the TrekStor DVB-T Stick with TotalMedia 3.5
a) Start the TotalMedia 3.5 software under "S
Note: Some settings will be carried out with the aid of an assistant during intial use. Then follow the instructions.
b) You will be in the main menu in which you can navigate using the mouse, keyboard, or with the aid of
the infrared remote control.
c) In the main menu, select the menu item "TV" and subsequently "c
d) In the following steps, choose your region and start the channel search. (If you use "LCN", the channels
will be sorted automatically).
e) Once the channel search has finished, click on "c
Note: The channel search can take a few minutes.
After this, the following basic functions will be available to you:
Play/Pause ( ): Press the
A
the TV playback (Time Shift).
Change station ( /
!
Record: Press the "reCorD" button to start recording the current TV playback.
Stop: Press the "STOP" button to stop the current TV recording.
Change volume: Press the
Note: You can find a detailed description of the software "a
in the download section for the DVB-T Stick Terres on our website www.trekstor.de. You can also access the
manual via the CD menu.
4) Logging off the TrekStor DVB-T Stick
At the bottom right on the task bar, click the left mouse button on the symbol "S
"r T S DVB-T S
eMoVe rek Tor Tick
DVB-T Stick from your PC.
5) Troubleshooting
I connected the DVB-T Stick to my computer, but the device is not recognized by my operating system.
There may be multiple solutions to this problem:
1) Install the drivers found on the CD. Please note that the drivers are only suitable for the Windows® XP,
Vista™ and 7 operating systems. Other operating systems are currently not supported.
2) Check the USB port on your computer for operational reliability and, if necessary, connect the
DVB-T Stick with another USB port.
"
TarT
button to stop the TV playback. Press the
A
): Press the
or button to change to the previous or next station.
" ! "
or button to raise or lower the volume.
a b
" from the context menu that appears. Now you can disconnect the
"P " "a S T
+ +
rograMS rc ofT oTal
onTinue
" to enter the TV mode.
onTinue
S T M 3.5" in the manual that you can find
rc ofT oTal eDia
M 3.5.
eDia
" in the Setup Assistant.
button again to continue
A
r h
afely eMoVe arDware
". Select
EN
9