Using The Controls; Select Signal; Select Temperature; Select Cycle - Crosley CD-1 Guía De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Using the Controls

STEP
1

Select Signal

End of Cycle Signal
When the cycle is complete, a signal will sound several
times. The End of Cycle Signal volume is adjustable.
To adjust the volume, select any setting between OFF
and HIGH.
STEP
2

Select Temperature

In order to select the correct temperature, turn the
temperature control to Regular, Low or Air Fluff.
DRYER TEMPS
Sturdy cottons or labels marked
Regular
Tumble Dry.
For heat sensitive items labeled
Low
Tumble Dry Low or Tumble Dry
Medium.
Items which need freshening.
Air Fluff
Load tumbles with room
temperature air.
3
LOAD TYPE
STEP
3

Select Cycle

To select a cycle, rotate the control dial to the desired
setting. When using an Auto Dry cycle, the control dial
should point between More Dry and Less Dry for most
loads.
Loads of larger or bulkier size may require the More
Dry setting to completely dry the load. The Less Dry
setting is best suited for lightweight fabrics or for leaving
some moisture in the clothing at the end of the cycle.
Auto Dry Regular
The Auto Dry Regular cycle is designed to dry most
cottons and linens. At the end of the cycle, the clothes
are cooled for approximately 10 minutes to reduce
wrinkling.
Auto Dry Wrinkle-Free Fabrics
The Auto Dry Wrinkle-Free Fabrics cycle is designed to
dry wrinkle free cottons, synthetic fabrics, double knits
and permanent press fabrics automatically.
Cool Down is provided to minimize wrinkles in the
Auto Dry Wrinkle-Free Fabrics cycle. This feature
provides an extra 25 minutes of unheated tumble
action at the end of the cycle. Clothes can be removed
any time during this portion of the cycle.

Publicidad

Tabla de contenido
loading

Tabla de contenido