Bartscher 7GN210 Instrucciones De Montaje página 11

Assembly
5. Place the clearing trolley on the castors and check its stability.
6. Clearing trolley may be levelled with use of castors by screwing or unscrewing them.
7. After placing the clearing trolley in required place lock 2 castors with
stoppers to prevent the incidental relocation or falling down.
1. First install 2 cross members to one of initially
assembled side parts of the clearing trolley.
Place square washer between the cross
member and side part and between the side
part and bolt, and tighten those elements with
use of Allen wrench.
2. Connect cross members with another side part
as above.
Fig. 1
3. Fix the storage space to the side parts with use
of attached bolts.
Fig. 2
4. Put the clearing trolley on its side or shelf and
install the castors buffers to the side parts. Finally
screw 4 castors into the side parts.
Fig. 3
- 7 -