Healthy Living BVM-1007 Manual Del Usuario página 20

*If the bulb symbol again begins to flash, that is an
indication that more air is needed and you should resume
pumping until the flashing stops.
6.As the monitor determines your blood
pressure, numbers will appear and change
on the display screen until your reading is
complete.
7.When your measurement is complete the
" " icon will appear. This is your signal
to deflate the cuff by depressing the Air
Release knob.
8.The process should take less than a
minute and once the measurement is
complete your blood pressure and pulse
rate will be displayed. The monitor will
turn itself off approximately 1 minute
after completing a reading.
Taking a Blood Pressure
Measurement
Taking a Blood Pressure Measurement
Inflation
Deflation
19