Kohler K-99693 Guía De Instalación Y Cuidado página 4

Outlet
Interface
Power Cord
Controller
1. Preparation
NOTE: Your system can be set up to use three interfaces. One
interface, installed inside the shower, is required.
NOTE: A mounting bracket (not included) is required for interface
installation.
Determine the locations of all components before beginning
installation.
Allow enough slack in the cables for drip loops.
Route the interface cable(s) to the interface installation location.
Complete the finished wall.
1194161-2-A
Power
Supply
4
Coupler
Drip Loop
25' (7.6 m)
Cables
Kohler Co.