Sparco CE R44/04 Manual De Instrucciones página 18

Care instructions
3.2 Refitting the 5 point harness system and cover
After washing, place the cover on the
shell.
Pass both sides of
harness strap through
strap slots at the
bottom of seat. Then,
lead straps through
buckle metal connector
Pass buckle clip
through buckle pads
and put clip into bottom
slot, then rotate it to
shown position in right
picture.
Pass harness straps
through shoulder pads
and insert them into
harness slots, then
connect the end of
strap with metal
connectors.
Also pass the end of the shoulder pads
strap through the harness strap slot and
shell, then fix into the strap yoke. Make
sure the seat straps can not be rotated.
Close the buckle, then fasten the cover all
around. Close the snap buttons on the
back. Check that it works!
18