Sennheiser DSP 360 Instrucciones Para El Uso página 15

Switching the DSP-360 on / off
To switch the DSP-360 on, press this button
for a short time. Please press for a longer
time to switch it off (approx. 2 seconds).
Selecting the operating mode
"SPEAKER": The virtual Dolby Surround
sound is switched through to the
loudspeakers via your receiver.
"HEADPHONE": The virtual Dolby Surround
sound can only be heard via the connected
headphones; the loudspeakers are switched off.
"BYPASS": The DSP processor is switched
off and the sound passes through unchanged
(loudspeakers in operation).
and : Volume adjustment for connected
headphones.
15