Klarstein Quickstick Free Manual Del Usuario página 12

EN
12
(5) Set timer: The timer counts up the set time. Briefly press the [+] or [-] button to set the
timer between 0-60 minutes. Press and hold the buttons to set the timer faster.
Note: When the current water temperature has reached the set temperature, press
MINUS twice to stop the alarm and start the timer. The display shows the current
elapsed time.
• If you want to check the set time, click SET twice. Press SET again to display the
current timer again.
• While the timer is running, press MINUS twice to reset or change the timer.
• When the timer has expired, double press MINUS to stop the alarm.
(6) Prepare food: Press POWER once to start heating and circulating the water. Place
the packaged food in the tank as soon as the set temperature is reached.
(7) When the food is cooked, turn off the appliance by pressing POWER for 5 seconds.
DESCALING
With frequent use, descaling should be done every month or more often in regions with
hard water.
1 Put the appliance in a pot and fill the pot with water to the „Max" level indicated on
appliance.
2 Set the appliance temperature to 70 °C.
3 Add 5 g of citric acid powder (Food grade) per liter of water used.
4 Allow the water to circulate for 20 minutes after 70 °C is reached.
5 Turn off and unplug the appliance.
6 When appliance is cool, rinse the bottom in the cold water and dry before storage.