Air Live WHA-5500CPE Guia De Inicio Rapido página 10

Configuration Steps
Please install your network cards first before the AP
Screw-in the antenna (clockwise) into the Antenna connector
Connect the power and LAN cable to the back
Use your wireless card to do a site survey, the default SSID is airlive
If you need to change AP's configuration, please follow the procedure below:
The AP mode's default IP address is 192.168.1.1. Please make sure your computer IP is in the
same subnet as the AP (i.e. 192.168.1.x)
Open the web browser and enter 192.168.1.1.
Enter the Password airlive.
AP Mode Configuration
In Setup Wizard>>Wireless Settings
Define a SSID for your AP.
Select the WLAN mode and the channel of your
choice.
Press 'Apply' button. The device will save and ask to
reboot.
Reboot the device. This configuration can act as AP.
If you need extra configuration of encryption, please
refer to the encryption session of the user's manual for
further information.
WHA-5500CPE
English
8