Axis P33 Serie Guia De Instalacion página 20

AXIS P33/-V Network Camera Series
1
Locking screw
2
Lens holder
3
Marking (design A)
4
Marking (design B)
2. Loosen the locking screw.
3. Check the Live View page and turn the lens holder to rotate the lens 90° or 180°.
4. Once satisfied, gently tighten the locking screw to secure the lens holder's position.
Tilt the Lens
NO TICE TICE
NO NO TICE
Valid for AXIS P3365–V/P3367–V/P3384–V: The lens should not be tilted more than 90°,
this may cause damage to the product. Follow the instructions below.
20