Symbols - PowerSmith PLM14021H Manual Del Operario

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
V
Volts
a
amperes
Hz
Hertz
W
Watts
.../min.
Per Minute
alternating Current
Direct Current
Read the operator's Manual
Wear eye Protection
Safety alert
keep bystanders away
Wet Conditions alert
Richochet
No Reach
Safety key
No Slope
electric Shock Hazard
keep Hands and feet away
English

SYMBOLS

NAME
Voltage
Current
frequency (cycles per second)
Power
Revolutions, strokes, surface speed, orbits etc., per minute
Type of current
Type of current
To reduce the risk of injury, the user must read and
understand operator's manual before using this product
always wear eye protection with side shields marked to
comply with aNSI Z87.1
Precautions that concern your safety.
keep all bystanders at least 100 ft. away.
Do not expose to rain or use in damp locations
Thrown objects can ricochet and result in personal injury or
property damage.
Do not reach hands or feet under mower deck.
Switch off and remove safety key before adjusting, cleaning
and before leaving the product unattended.
Do not operate on inclines greater than 15º. Mow across the
face of slopes, never up and down.
failure to use in dry conditions and to observe safe practices
can result in electric shock.
keep hands and feet away from blade and cutting area.
6
EXPLANATION