Garden Treasures PG183H Manual Del Usuario página 8

ASSEMBLY INSTRUCTIONS
1. With the base (H) upside down, attach
wheel assembly (G) using M8 x 15 mm
bolts (AA) and M8 nuts (CC).
Hardware Used
AA
M8X15mm Bolt
M8 x 15 mm Bolt
M8 Nut
M8 Nut
CC
2. Turn the base (H) right-side up, then attach
cylinder assembly (F) using M5 x 8 mm
black bolts (BB) though preassembled
L-pins.
Note: The door on the cylinder assembly
(F) should be on the opposite side of the
wheel assembly (G).
Hardware Used
BB
M5 x 8 mm Black Bolt M5 X 8mm Bolt
3. Attach pole assembly (E) to cylinder
assembly (F) using M6 x 10 mm bolts (EE).
Note: Ensure the pole assembly (E) is
straight. Then, use deck ring (D) to cover
connection.
Hardware Used
M6 X 10 mm Bolt M6 x 10 mm Bolt
x 2
X 2
x 2
X 2
X 5
x 5
x 4
X 4
8
1
H
CC
2
Door
F H
G
Back
3
D
E
EE
F
AA
G
BB