Russell Hobbs 19420-56 Instrucciones página 2

Read the instructions, keep them safe, pass them on if you pass the appliance on.
Remove all packaging before use.
A IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
1 This appliance must only be used by or under the supervision of a responsible adult. Use and
store the appliance out of reach of children.
2 Don't put the appliance in liquid, don't use it in a bathroom, near water, or outdoors.
3 Keep fingers, hair, clothing and kitchen utensils clear of the whisks.
4 Route the cable so it doesn't overhang, and can't be tripped over or caught.
5 Don't leave the appliance unattended while plugged in.
6 Don't let anything enter the vents.
7 Don't use accessories or attachments other than those we supply.
8 Don't use the appliance for any purpose other than those described in these instructions.
9 Don't operate the appliance if it's damaged or malfunctions.
10 If the cable is damaged, it must be replaced by the manufacturer, its service agent, or
someone similarly qualified, in order to avoid hazard.
C FITTING THE WHISKS
1 Switch off (0) and unplug the mixer before fitting or removing the whisks.
2 Turn each whisk to align the pips on the shaft with the slots in the drive head, then push it
into the drive head till it clicks into place.
3 The whisks may be fitted to either drive head.
C REMOVING THE WHISKS
4 Switch off (0) and unplug the mixer, then shake any excess mixture into the mixing bowl.
5 Hold both whisks, to prevent them jumping out, and press 5. This will eject them from the
drive heads.
C USING THE MIXER
6 Move the speed control to 0.
7 Put the plug into the power socket.
8 Move the speed control to the speed you require (1 to 6).
9 Generally, large quantities, thick mixes, and a high ratio of solids to liquids suggest longer
timings and slower speeds.
household use only
2