Lenco LPJ-300WH Manual De Usuario página 23

Using Projector Menu 1.0
Press button to enter projector menu. Press again to previous status.
Picture Mode
Contrast
Brightness
Color
Sharpness
Tint
Color Temperature
Aspect Ratio
Noise Reduction
Screen
1.
Picture Mode
Select Vivid, User (custom), Soft, or Standard
2.
Contrast, Brightness, etc.
Set Picture Mode to "User" to adjust these settings. Tint can only be
adjusted in AV and NTSC IN
3.
Color Temperature
Select Warm, Cool, or Medium.
4.
Aspect Ratio
Select 16:9, 4:3, or Auto
5.
Noise Reduction
Select Off, Low, Middle, High or Default
6.
Screen
Can only be a adjusted when in VGA mode
Color temper... (temperature)
Customer define
red
blue
green
Aspect Ratio
4:3
16:9
Standard
50
50
50
50
50
Medium
Auto
Middle
The signal in a 4:3 aspect ratio projection image.
The signal in a 16:9 aspect ratio projection image.
Use buttons to select an item.
The selected item is displayed in the
upper right of the screen.
Parameter
0-100
0-100
0-100
21