Putting Into Operation; Use - Paoli Avvitatori DPLIFT 406 Manual Uso Y Manutención

PUTTING INTO OPERATION

CONNECTION TO THE COMPRESSED AIR SYSTEM
- Compressed air enters into the jack circuit through the quick coupling on the top of the manual lifting/
descending controls; it is therefore necessary to have a connecting pipe with a quick coupling compatible with
that of the jack. Check that the air supply pipe has a useful passage of at least 6 mm and it is not pinched or
restricted anywhere. DWG. 7
- Absolutely never put the following into the compressed air circuit: hydraulic or Vaseline oil, brake liquid,
kerosene or other liquids.
-Install a filter dehumidifier-lubricator unit in the compressed air system.
- If you want to lubricate the compressed air circuit use exclusively:
ACCESSORIES
The jack can be supplied with two extensions or height adaptors (long extension 100 mm, short extension 50
mm.)
THE MANUFACTURER IS NOT LIABLE FOR ANY DAMAGE RESULTING AS A CONSEQUENCE
OF DISREGARD FOR THE ABOVE INDICATIONS AND THE WARRANTY CONDITIONS ARE
SCRAPPING AND DISPOSAL
- The lubricants must be disposed of in compliance with the anti-pollution laws in force.
- Scrapping the jack and its component parts must be carried out by the user in accordance with current laws.

USE

- Expressly observe the safety rules already described in this manual.
1) Position the jack under the supports as described in the manual of the vehicle.
the manufacturing company is not responsible for any break or damage to the lifted vehicle or to
persons or property due to an incorrect use of the jack.
2. Press the right key on the distributor box for lifting. DWG. 8
3. Press the left key on the distributor box for lowering. - After lifting the load, it is absolutely essential
to rest it on the support stands before doing any work under it.
WORKING AIR PRESSURE: 8 - 10 BAR
AGIP OSO 100; MOBIL DTE 27; ESSO TERESSO 100;
SHELL TELLUS 100; BP ENERGOL HP 100
NEVER USE MORE THAN TWO EXTENSIONS!
INVALIDATED THEREOF!
EN
14