Scale Removal - Lagrange 509 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
UPKEEP
For cleaning the unit, you should take care to:
Always unplug the unit and let it cool down before washing it.
*
Do not put the base, the cord or the plug into water. Do not allow
*
water to enter the base of the kettle.
Clean the kettle and the base with a moist cloth. If the kettle is
*
very dirty, add a small amount of soap.
Do not use scouring pads, steel wool or any form of powerful
*
solvents or abrasive cleaning products to clean the unit, because they
can damage the exterior surfaces of the unit.
Remove the scale filter by pulling it up and clean it using a brush.
*
Put it back in place once it has been cleaned.
IMPORTANT! Let the unit dry completely after cleaning before
*
using it again. The unit should not be used if the base or the
underside of the kettle is wet.
Make sure that the unit is dry and clean before storing it.
*

SCALE REMOVAL

The presence of scale increases progressively with use.
Once a month, fill you kettle with white vinegar diluted with water
(
/
,
/
) and leave it cold to react for
1
3
2
3
Rinse several times with tap water.
You can also use scale remover for coffee makers, following the
manufacturer's instructions.
47
E N G
hours or more.
2

Publicidad

Tabla de contenido
loading

Tabla de contenido