Maintenance / Cleaning; Technical Specifications - Miniland natural sleeper Manual De Instrucciones

Note 1: The sound will not be affected by the light and vapor, as these functions operate
independently.
5.3. DEALING WITH PROBLEMS
SYMPTOMS
The device is not
emitting vapor
The vapor has a
bad smell
The vapor doesn´t
smell of essence
Only a little vapor
is coming out of
the nozzle
Abnormal noise
Other operating
faults
6. MAINTENANCE: CLEANING
In order to ensure the product is always clean:
· Use purified water
· Change the water in the base (2) on a daily basis if all the water is not consumed.
· Always remove the water from the base (2) when you are not using the device.
· Dry the device with a soft cloth to prevent lime deposits.
· Clean the base of the unit (2) and the ultrasonic transducer (6) on a regular basis as illustrated in
the following item.
Cleaning the base (every 2 - 3 weeks)
· Use a mixture of vinegar dissolved in water to remove lime deposits from the base. In the event of
lime deposits on the vibration plate (6), clean it gently with a cotton bud soaked in vinegar.
· Do not use detergent to clean any parts containing water as this could interfere with the unit´s
outlet if it comes into contact with the water.
Cleaning the outside of the device
· Use a cloth and water of less than 40º C in temperature to clean any stains from the outside of the
device. The vapor outlet nozzle can be washed directly in a jet of water.
Storing the device
· When you do not intend to use the apparatus for a long period of time remove the water from the
base (2). Clean the device, dry it thoroughly and place it in its original packaging.

7. TECHNICAL SPECIFICATIONS

CAUSE
The device is not connected to the
power source
The device has not turned on
There is no water in the base (2) of
the device
The device is new
The water is dirty or has been in the
tank for a long time
No essential oil has been added
The ultrasonic transducer is dirty
There is only a little water in the
base (2)
There is only a little water in the
base (2)
Vibration of the surface on which the
device has been placed
Contact the Miniland technical assistance department
ACTION
Connect the device to the power
mains
Turn the unit on by pressing the on
button (3)
Fill it with water
Remove the cover and leave the
base to air in a cool and dry place for
12 hours
Clean the tank and refill it with clean
water
Add essence to the base (4 or 5
drops)
Clean the transducer as instructed in
item 6 of the instructions manual
Fill it with water
Fill it with water
Place the unit on a flat stable surface
9
ENGLISH