Bas; Fil; Loc; Backup - Galileo VP121 Manual De Uso

owner's manual

BAS:

This function allows you to edit the Bass section MIDI IN/OUT confi guration, (1...16).
Default: MIdi channel 3.
Edit the value using the TEMPO/DATA buttons.
Press ENTER to confirm.

FIL:

If you are using the piano to control other instruments connected via MIDI, it may be
necessary to filter the Control and Program change messages from the MIDI transmission.
Pressing the TEMPO/DATA button the display shows the current value (OFF by default).
Set the filter type using the TEMPO/DATA buttons.
0 OFF
1 Program Change
2 Control Change
3 Program Change + Control Change

LOC:

This function allows you to properly connect the piano to a computer MIDI network,(ON/
OFF)
Default: ON.
Set OFF using the TEMPO/DATA buttons.
(F9) Backup
With this menu you can decide if the default start set up of the piano will be factory set or user set.
Default: ON.
Set OFF using the DATA buttons.
(F10) Speaking help
To disable or enable the voice-help in the function menu.
Default: ON.
Set OFF using the DATA buttons.
(F11) Restore deafaults
This will Restore Factory Settings on the piano. The sequencer memory will be erased.
Default: YES.
Set NO using the TEMPO/DATA buttons.
Set YES and press ENTER to confirme the factory reset: the piano will re-start.
(F12) Release
This function will illustrate the software release number on your
VP121 piano.
Enter
TEMPO/DATA PROGRAM
Press ENTER to confirme.
Function
VP121
EN 12