Viceversa TIX 71 Serie Manual De Usuario página 10

1. Put the ingredients in an appropriate container.
2. Attach the arm of the blender to the motor and lock into place.
3. Insert the plug into a wall socket.
4. Immerse the blade guard completely into the ingredients.
5. Push the on/off button ; it is possible to change the speed settings by turning
the speed selector. It is advised to start with a lower speed setting to avoid
splashing.
6. To blend the ingredients, move the appliance slowly around using vertical or
circular movements.
CLEANING
• Do not immerse the motor in water.
• Remove the plug from the power source.
1. Push the unhook button to remove the
motor from the arm of the blender (fig. 1).
2. 3. Pass a wet cloth over the motor.
3. 4. The arm of the blender can be washed or
in a dishwasher, pay careful attention to the
blades.
18
IDENTIFICATION SEAL
The identification seal carries technical data, the serial number and the branding.
The identification seal must never be removed.
The symbol of the crossed bin that appears on the appliance indicates that the
product, at the end of its use of life, must be treated separately from domestic
waste, it must be placed in a differentiated waste collection facility for electrical
appliances and electronics or returned to the seller at the moment of a new
purchase of an equivalent appliance.
The appropriate differentiated garbage disposal is needed in order to start the
production of recycled appliances , with environmentally friendly treatment and
disposal, which contributes to the prevention of negative environmental and
health effects and favours the recycling of materials of which it is composed.
The user is responsible for disposing the appliance at the end of its life in the
correct waste disposal facility. For more detailed information regarding waste
classification, contact your local waste disposal service, or the place where the
item was bought.
Whoever abandons or throws away this appliance and does not take it to a
differentiated waste disposal facility for electric and electronic waste may be
punished with financial administrative sanctions provided for by abusive waste
disposal law.
fig. 1
19