Filter Removal; Care Recommendations; Troubleshooting - Wolf Pro Guía De Uso Y Mantenimiento

PRO WALL VENTILATION HOOD CARE

Filter Removal

To remove filters, press upward then rotate bottom
outward. Refer to the illustration below. To aide in removal,
remove center filter first. Remove grease cups from
bottom edge of hood. Gloves should be worn when
handling filters.
Reinstall using the reverse procedure. Outer filters may
need to be pushed over while the center filter is installed.
IMPORTANT NOTE: Do not operate the ventilation hood
without the filters. This may cause damage to the blower
or other internal components of the hood.
SPRING GREASE
CUP
FILTER
SIDE VIEW
Filter removal.
6 | English

Care Recommendations

STAINLESS STEEL
Use a nonabrasive stainless steel cleaner and apply with
a soft lint-free cloth. To bring out the natural luster, lightly
wipe surface with a water-dampened microfiber cloth
followed by a dry polishing chamois. Always follow the
grain of stainless steel.
CONTROL KNOBS
Using a damp cloth, wipe with mild detergent or spray
degreaser; rinse and dry.
FILTERS AND GREASE CUPS
The stainless steel baffle filters and grease cups (if appli-
cable) should be cleaned approximately every month,
depending on use. You may need to clean the filters more
often if your cooking style generates large amounts of
grease (for example, frying or wok cooking).
The filters are dishwasher safe and are designed to fit
most dishwashers. Wolf recommends wiping filters and
grease cups to remove any excess grease before placing
in the dishwasher.
There is a fire risk if cleaning is not carried out in accor-
dance with these instructions.

TROUBLESHOOTING

Troubleshooting
Ventilation hood does not operate.
• Verify the electrical connection to the hood has not
been disconnected.
Blower runs but lights do not operate.
• Verify bulbs have not burned out.