Washing Instructions - bebeduE GR016-15V1 Manual Del Usuario

EN
CHANGING THE HEIGHT OF THE SHOULDER STRAPS (Fig. 8)
A. Unfasten the harness by pressing on the red button.
B. Remove the pads from the shoulder straps.
C. Remove the head hugger.
D. Pull the straps through from behind the back support, then pass them through the higher
or lower slot as required.
E. Once the straps have been passed through the desired slot, put the head hugger
and the shoulder strap pads back in place.
REMOVING THE GROUP 0+ SEAT COVERS FOR WASHING (Fig. 9)
A. Remove the canopy. To do this, put the carry handle into position as shown in Fig. 2. Move
the canopy forwards until the hooks on the bar are in line with the catches, then pull the
bar outwards.
B. Unfasten the harness in order to remove the head hugger and the shoulder strap pads.
C. Remove the crotch buckle. To do this, look for the metal connector which holds
the buckle strap to the lower part of the group 0+ seat. Pull the connector outwards and
remove the strap from the connector.
D. Pull the buckle upwards and remove the protective pad.
E. Unhook the side clips from the cover.
F. Pull the upper and lower parts of the cover towards you to release the cover.
To put the cover back on, follow the instructions in reverse order.
ADJUSTING THE CARRY HANDLE (Fig. 10)
Press the red buttons on either side and adjust the carry handle to the desired
position. The handle has 4 positions.

WASHING INSTRUCTIONS

Hand wash with warm water using a detergent for delicate fabrics. Do not use
abrasive detergents and never use bleach or attempt to dye the fabric.
Hang up to dry in the shade.
Check the washing care labels.
Plastic and painted parts must be cleaned with water and a mild detergent: never use an
abrasive detergent.
MAINTENANCE
As in the case of other products with moveable parts, this group 0+ seat requires regular
maintenance in order to avoid service issues. Use protection against high temperatures
(sunshade designed for the car seat) when parking the car in the sun.Never leave your
group 0+ seat exposed to direct sunlight for prolonged periods of time as this may damage
fabrics and plastic components. Regularly check the parts of group 0+ seat.
Regularly inspect the joints, fastenings, straps, grips, etc., in order to ensure that they are safe
and ful l their intended functions.Store the group 0+ seat in a safe and dry place.