Sparco F1000KI Manual De Instrucciones página 11

Group II/III Car Belt with ISOFIX Installation
2.1 Installation of Group II/III and it is for the children
whose weight between 15‐36kg. Recommended use.
WARNING
Do not to use any load bearing contact points other than
those described in the instructions and marked in the child restraint.
The belt must be routed as shown in the instructions.
Press the ISOFIX release button and push the ISOFIX
connectors forward as far as.
Push the ISOFIX
connectors
into the anchorages
until heard
audible sound.
Grasp the seat body to check the seat if it
is fastened tightly or shakes. if the seat
shakes and the ISOFIX connectors are
pulled out, please repeat the above steps
and install it .
Then follow the section 2.2 to finish the installation.
directly
an
GB
ES
FR
IT
PT
DE
11