Paradox PMC-5 Guia De Inicio Rapido

PMC5-TI00
Hand-Held Plug-in USB
PMC-5 Memory Key
Instructions
paradox.com
English
Copy or download using WinLoad (A*)
1) Insert the memory key onto the PC's
USB connector and open WinLoad.
The memory key's blue LED will flash
during the transfer. The blue LED will
stop flashing once the transfer is
complete.
2) From the WinLoad menu, click setup
followed by Connection. The
connection setting box appears.
3) Click on memory key tab and choose
COM Port identified as memory Key.
4) Right click on the module and choose
Mem Key to PC or PC to Mem Key
from the drop down menu.
Warranty
For complete warranty information on this product please refer to the Limited Warranty Statement found on the website www.paradox.com/terms. Your use of the Paradox product signifies your acceptance of all warranty
terms and conditions.
© 1999-2007 Paradox Security Systems Ltd. All rights reserved. Specifications may change without prior notice. One or more of the following US patents may apply: 7046142, 6215399, 6111256, 6104319, 5920259,
5886632, 5721542, 5287111, 5119069, 5077549. Printed in Canada - 08/2007
Garantía
Para una información detallada acerca de la garantía de este producto consultar la Declaración de Garantía Limitada (en inglés) que se encuentra en el sitio web de paradox: www.paradox.ca/terms. El uso de este
producto Paradox significa la aceptación de todos los términos y condiciones de la garantía.
© 1999-2007 Paradox Security Systems Ltd. Todos los derechos reservados. Las especificaciones pueden cambiar sin previo aviso. Una o más de las siguientes patentes EE.UU. podría aplicarse: 7046142, 6215399,
6111256, 6104319, 5920259, 5886632, 5721542, 5287111, 5119069, 5077549. Impreso en Canadá - 08/2007
Garantie
Pour tous les renseignements sur la garantie de ce produit, se référer aux Déclarations sur les garanties restreintes qui se trouvent sur le site Web www.paradox.com/terms. L'utilisation de ce produit Paradox signifie
l'acceptation de toutes les modalités et conditions de la garantie.
© Systèmes de sécurité Paradox Ltée, 1999-2007. Tous droits réservés. Spécifications sujettes à changement sans préavis. Un ou plusieurs des brevets américains suivants peuvent s'appliquer : 7046142, 6215399,
6111256, 6104319, 5920259, 5886632, 5721542, 5287111, 5119069, 5077549 et RE39406. Imprimé au Canada - 08/2007
Introduction
The PMC-5 plug-in memory key with USB / 5-pin connector allows download or upload of
system programming between modules and WinLoad.
Compatibility
WinLoad Software V4.0
Refer to the appropriate installation manual to verify if the memory key is compatible with
the selected control panel or module.
Blue LED (B*)
Flashes
only during transfer
between the key and the
PC.
* See Reverse for Spanish and French translation.
Lock Switch (C*)
Prevents overwriting content of key.
Copy and download content of the key.
Copy and Download to or from the
Module or Panel (D*)
1) Insert the memory key onto the module
or panel's connector labelled "
Ensure that the lock switch is set on the
open padlock position.
2) Enter the module or panel's
programming and enter section number.
(Refer to the appropriate installation
manual for the required 3 or 4-digit
section number.)
3) Once a confirmation beep is emitted, to
ensure a complete transfer, wait a few
seconds before removing the memory
key.
4) Set the lock switch to the closed
padlock position to protect the memory
key's contents.
".
MEM KEY