Yarvik PMR400 Manual Del Usuario página 7

a. Manual search: click "
for stations manually.
b. Auto search: Broadcast stations will be
searched and saved automatically.
c. Preset mode: Select and listen to your
previously saved stations.
d. Stereo switch: Double-click to switch
between stereo and mono.
a. Reception area: Double-click to switch
between China/Japan/USA/Europe.
4. Click , and then click
Click to turn pages.
5. Click saved station; then click
the saved station. You will be asked to
confirm before it is actually deleted.
6. FM recording
Click to enter the FM recording interface.
a. Click to start recording.
b. Click to pause, and click
continue recording.
c. Click to stop recording.
d. Click to set the quality and volume.
7. Click to quit.
Record
Choose the "Record" option in the main menu,
and then click the corresponding icon to enter
the Record interface. For further instructions
please refer to FM recording.
Other
Choose the "Other" option in the main menu,
and then click the corresponding icon to enter
the Other interface.
1. StopWatch: Click "Start" to start, and click
/ " to search
to save.
to delete
again to
"Pause" to pause (this function can also be
accessed by clicking "
clear the recording.
2. Calendar: Click
month. click /
value.
3. Explorer: All files and folders will be shown.
Settings
Choose the "Settings" option in the main menu,
and then click the corresponding icon to enter
the Settings interface.
1. Display setting
There are 5 options: Light time, Brightness,
Light mode, Move style, Photo browse. Double-
click the option to confirm your choice.
a. Light time
There are 6 options: 5s, 10s, 15s, 20s, 30s,
Always on.
b. Brightness
There are 5 options: One, Two, Three, Four, Five.
c. Light mode
There are 2 options: All dark, Penumbra.
d. Move style
There are 5 options: Left In Right Out, Double
Move, Up In Down Out, Transps, Scale.
e. Photo browse
There are 4 options: Turn off, 5 sec, 10 sec, 15 sec.
2. System setting
There are 4 items: Upgrade, Restorable, Calibration
OK, Tilt sensor.
a. Upgrade
When clicked, the firmware will be scanned
automatically and you will be told whether you
need to upgrade.
"). Click "Clear" to
to adjust the digit: year or
to adjust the numeric