Ambiano 72813A1 Manual Del Usuario página 8

User instructions
How to use the can opener
1. Lift the cutting head and plug the unit
into an outlet.
2. Tip the can forward so that it's rim is under
the cutting head and the magnet comes down.
3. Press down on the cutting head while making
sure, the blade is on the inside rim.
4. The can will rotate and the blade will cut the
can open. This can opener has a hands-free
feature, it is not necessary to hold the cutting
head down or support the can during cutting.
Note: In the case that a can weighs more than 18oz, it is necessary to press
and hold the can opener to avoid overturning.
5. When the can is opened, the can opener will stop automatically.
6. To remove the can, hold it with one hand and raise the cutting head with the
other one.
Caution: Avoid contact with the cut edges of the can or the lid, as they are
very sharp! Carefully remove the lid from the magnet and discard.
Can opening tips
1. This can opener should not be used to open cans designed to be opened by
another method, such as a pull tab, peel-off foil seal, or rolling key. This can
opener will not open rimless cans or cans with angled corners.
2. If there is a dent in the rim of a can, open the other end or start the cutting
action just beyond the dent.
3. Cans with heavy seams, uneven rims or odd shapes may cause the can opener
to stall. If this occurs, turn the can slightly by hand to aid the cutting action.
4. Cans with aluminum lids will not stick to the magnet.
5. This item is not dishwasher safe.
8
User instructions