Lightway SP-2016PIRB Manual Del Usuario página 10

_______
2. Adjusting the "RANGE" dial:
 To increase the detection zone, turn the "RANGE" dial toward the "MAX"
position.
 To decrease the detection zone, turn the "RANGE" dial toward the "MIN"
position.
3. Adjusting the "ON-TIME" switch:
The "ON-TIME" switch determines the amount of time the light will stay on after
all motion has stopped.
 Set the "ON-TIME" switch to the 1, 5 or 20 minute position.
4. Using manual mode:
Manual mode overrides the motion sensor "ON-TIME" control so the light will
operate. This feature will only work at night time. The motion sensor will reset to
the sensing mode at sunrise. Manual mode can be turned on and off using a wall
switch.
 To turn manual mode on, switch the light at the wall switch for 1 to 3
seconds and turn back on.
 To turn manual mode off, switch the light at the wall switch for 1 to 3
seconds and turn back on.
10
___
SAVE THESE INSTRUCTIONS!
_______ User instructions